To connect and configure your D-Link Wi-Fi extender, follow these general steps:

Initial Setup:
Plug in your D-Link Wi-Fi extender near your router and within the range of your existing Wi-Fi network.
Wait for the power LED on the extender to turn solid green.
Connect to the Extender:
On your computer or mobile device, open the list of available Wi-Fi networks.
Look for a network name (SSID) starting with "D-Link" or "DAP" followed by some numbers. This is the default SSID of your extender.
Connect to this network. If prompted, enter the default Wi-Fi password (usually found on the extender or in the user manual).
Access Extender Setup Page:
Open a web browser on your connected device.
In the address bar, enter the default IP address for D-Link extenders, which is often "192.168.0.50" or "dlinkap.local". Press Enter.
You should be prompted to log in. Use the default username and password (usually "admin" for both) unless you've changed them.
Configure Extender Settings:
Follow the on-screen instructions to set up the extender.
You will likely be asked to select the Wi-Fi network you want to extend (your existing Wi-Fi network).
Enter the Wi-Fi password for your existing network when prompted.
You may have the option to customize the SSID and password for the extended network.
Complete Setup:
Once you've configured the extender settings, save your changes.
The extender may reboot to apply the settings. Wait for it to finish.
Connect Devices:
After the extender has been set up, reconnect your computer or mobile device to your regular Wi-Fi network. You should now see the extended network (SSID) listed as an available Wi-Fi network.
Connect your devices to the extended network using the new SSID and password if applicable.
Placement Optimization:
For optimal performance, place the extender midway between your router and the area where you need better Wi-Fi coverage.
Avoid placing the extender too far from the router or in areas with significant obstacles that may interfere with the signal.
By following these steps, you should be able to successfully connect and configure your D-Link Wi-Fi extender to extend the range of your existing Wi-Fi network. If you encounter any issues during setup, refer to the user manual for your specific extender model or contact D-Link support for assistance.
For assistance with setting up your D-Link extender, you can visit https://www.callroutersupport.com/dlink-extender-setup/  This link may provide step-by-step instructions or troubleshooting tips to help you successfully set up and configure your D-Link extender to extend the range of your Wi-Fi network.